=== Für die PCBs ===
Dear Sir or Madam,

we would be grateful if you could send us a cost estimate for a double-layered 160x100mm printed circuit board with surface-mounted soldering for about 64 parts.

We're looking forward to hearing from you soon.

Sincerely,
Jannis Andrija Schnitzer
APS: Amok Prevention Systems GmbH i. Gr.

=== Für den Rest -> Heikos Antwort abwarten... ===
Dear Sir or Madam,

being a security company in its foundation phase, we need some appliances and devices to be produced. These include an alarm button with integrated communication system, a device that mechanically locks a door in case of emergency, and videosurveillance cameras. Research has shown us that your company would be the perfect manufacturing partner for us. Thus, we would be grateful if you could reply us with the minimum production quantities of the devices outlined below and a cost estimate for the same.

The alarm button is going to be the combination of the classic alarm button with a window pane the user will have to break and a telecommunication system. For this, a PCB needs to be mounted behind a metal plate with the described box (see design drawing).

The door locking device will include a coil and a magnetized bolt, which will be magnetically pushed into the door leaf on activation. An emergency lever will enable the user to pull the bolt out of the door again (see design drawing).

For the camera, we are going to licence a TI DMVA2 camera design. It is going to be used in a metal box.

We are looking forward to hearing from you soon.

Sincerely,
Jannis Andrija Schnitzer
APS: Amok Prevention Systems GmbH i. Gr.