[Config]

ShowState=3
; Initial Origin window state
; Leave blank for default or one of the followings
; #define SW_HIDE        0
; #define SW_SHOWNORMAL  1
; #define SW_SHOWMINIMIZED    2
; #define SW_SHOWMAXIMIZED    3

NumLevels=2
; Origin can have multiple menu sets, which are called levels.
; You can choose between the different levels
; from the Change Menu command in the Format menu.
; Each level is defined below by a Title and a File list.
; Number of levels defined is specified in the parameter above.

Title1=Full Menus
File1=Macros FullMenu
; The names in this list are config file names.
; They are assumed to have the file extension .CNF.
; Config files must be ASCII files written in the LabTalk script language.
; MACROS.CNF	: basic macros used by other config files
; FULLMENU.CNF	: adds to the menu structure for each child window

Title2=Short Menus
File2=Macros Short
ThemeFolder2=ShortMenus
; SHORT.CNF     : Cut down on Origin's generic menus.

; Control display of bitmaps on menus
ShowBitmapsOnMenus=1
CurrentWorkingDirectory=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\

; Ogs1 = OEvents
; Ogs2 = OEvents
; Origin can trigger multiple system events
; Uncomment this line and implement event handlers in OEvents.ogs

FadeHintWindowPos = 3
; 0 = Center, 1 = top-left, 2 = top-right, 3 = bottom-left, 4 = bottom-right

[Document]
; If the file for SYSVAR is specified, all variables with system
; attribute, like those defined in a configuration file,
; will be stored in this file and carried over to new documents.

SYSVAR=
; the '.' in front of the file name
; instruct Origin to look for the file in the current directory
; instead of the default, where ORIGIN.EXE is located.

[Options]
; Start-up settings for most of the commands in the Options menu
; (0=OFF, 1 = ON).

Level=1
; Starting menu level: 1,2..

ScriptWindow=0
Command Window=0

[Display]

SplineStep=30
; This number control the resolution(in 0.1 pts)
; in spline creation. The smaller the number,
; the finer the spline, but the longer to print or draw.
; if=10, spline point is calculated with an
; increment equal to 1 Point size in the X direction.

MasterItems=1
; Display the master page on each page if
; there is a plot window named Master present
; in the document

PrintNoBanding=1
; for device that support banding, this
; parameter can override that support
; if it is equal to 1, or enable
; that support if equal to 0

; Maximum number of Points in Poly Line
;MaxPolyLinePoints=3000

; Set whether you want Enhanced metafile to be put on clipboard when doing "Copy Page"
AddEMFInCopyPage=1
; Set whether you want Windows metafile to be put on clipboard when doing "Copy Page"
AddWMFInCopyPage=1
SysTheme=Dark Colors & Light Grids
Path=Origin
RangeLockPosition=0

; default handling related to the old "Set to printer dimension when creating graphs from this template"
; checkbox in Page level Print/Dimentions tab. You can uncomment these lines to chagne the default
;
;defprntcheck=0
;defpagewidth=6400
;defpageheight=4800
;defpageres=600

[Font]
;FontNumber Controls the font used for script editing
;FontNumber is 0 for disable
;1 for OEM_FIXED_FONT
;2 for ANSI_FIXED_FONT
;3 for ANSI_VAR_FONT
;4 for SYSTEM_FONT
;5 for DEVICE_DEFAULT_FONT
;6 for SYSTEM_FIXED_FONT			
FontNumber=0
;ResultLog font can be changed in the same way as FontNumber
ResultLog=6

;If FontNumber is not in the list of above, it will use origin system font.
;The font size can be specified by the following "FontSize" if it is larger than zero:
ResultLogFontSize=20 

[Text]

ScrViewNoFonts=1
; for even faster screen update. Also provides better reading when
; ATM is being used.  Disables all fonts and uses only
; the system font for screen display.  Printing is not affected.

Legend=\L(%d) %%(%d)\r\n
; the string is in C printf format
; the two %d will both receive the layer
; content index.
; third %d is supported to combine more info
; The %(i) notation take a @ argument
; @D=Dataset name (default)
; @C=Column name
; @WS=Worksheet name
; @LS=Column short name
; @LL=Column long name
; Example
;    Legend=\L(%d) %%(%d,@Col)\r\n
;       will put column names into the legend box
;    Legend=\L(%d) %%(%d,@WS) %%(%d,@LS)\r\n
;       will put both worksheet name and column 
;       short name in the lgend box
PlotLegend=%(?P)

; To modify axes title, uncomment and edit the following lines
; The default X axis title is the long name of the first independent dataset 
; XTitle=%%(1X, @LL) 
; The default Y axis title is the long name + unit of the first dependent dataset
; YTitle=%%(1Y, @LG) 
; The default Y axis title is the long name + unit of the first dependent dataset

TextCntrlByte=0
; 1=disable char by char positioning when generating metafiles.

StringLiteralBegin=<[<
StringLiteralEnd=>]>
; defined begin and end of Labtalk literal string, which is not part of the string

[Color]
SourceHeight=40
SourceIntensity=80
; Height of gradient light source in percent of area size
; for horizontal and vertical gradient for Page Color
Amplitude=12
; User defined colors for padlock icons.
; Each entry is 3 values representing Red Green Blue.
; Each value must be an integer from 0 to 255.
;PadlockClean=0 255 0
;PadlockDirty=255 255 0
;PadlockBroken=255 0 0

[Data]
; Data set in origin can be in either
; double precision or in 4 bytes floating point
; Setting Double=0 will allow for twice the
; data to be used in Origin
Double=1
;0 for single precision 1 for double


[Import]
CntrlByte=3 ;read missing and reset range
;This parameter represent a control byte
; bit 0 (value 1)
;               ReadMissing
;               if=0, import will terminate
;               when non numeric is encountered on
;               numeric columns.
;               if=1, import will terminate
;                only if the end of file is reached.
; bit 1 (value 2)
;               Reset range
;               If set, auto reset all plot range to
;               reflect import data range
;               otherwise plot range will stay intact.


[PIE]
PATTERN=0 1 2 3 4 5 6 7 8

[AddOn]
; in the form cmdName=DLLname
RS=LabCom
GP=LabGpib
DA=LabData
TIME=LabTime
RTMFFT=LabFft
ED=OLbTEdit

[WinPos]
;Origin window, the EXE vesion will define the 1st lunch position and by default we don't specify that
;top left right bottom, like
;Origin=0 0 790 678
;or 0 to indicate let Windows decide, 1 = placed in the center of the primary mornitor
Origin=114 114 1650 907
DefOffsets=22751 -1802 -16057 -17726


[FillColumn]
;Mean and Standard deviation for normal distributions
;Range for Uniform distributions
;created using fill column buttons/shortcuts.
;Default values are 0 for NORMAL_MEAN, 1 for NORMAL_SIGMA (standard deviation)
;0 for UNIFORM_MIN, 1 for UNIFORM_MAX
NORMAL_MEAN=0
NORMAL_SIGMA=1
UNIFORM_MAX=1
UNIFORM_MIN=0

[UserDefinedButtons]
User Defined=Oubtn.ini
User Defined 2=Oubtn2.ini
User Defined A1A2B1B2=OubtnA1A2B1B2.ini

[OriginC]
StartupCompile=1
ShowFullPath=8
;1 = build on startup, 0 to disable, -1 to disable system files compilation and precompiled header
;BuildOnStart=0

[OriginCSystem]
;These files will be compiled when Origin start
;there is also a file called sys_utils.c that is always compiled unless you
;force this whole mechanism to be off by setting [OriginC] BuildOnStart=-1
File1=system\internal.c
File2=system\matrix.c
File3=originlab\GetNBox.c
File4=originlab\analysis_utils.c
File5=originlab\theme_utils.c
File6=originlab\OriginEvents.c
File7=originlab\tree_utils.c
File8=originlab\LT_wks.c
File9=originlab\LT_PE.c
File10=originlab\page_utils.c
File11=originlab\XFunction.c

[UserFiles]
; Optional section. 
; You can skip the User Files Folder dialog at first startup of Origin by specifying the Path here.
; Note: Make sure the path you choose will be write enabled for the user who will run Origin.
;
; To set the User Files Folder to the default folder that appears in the User Files Folder dialog, set Path=1
; Path=1
;
; To set the User Files Folder to a subfolder of the install folder using the logon users name 
; (<install folder>\<logon user name>\), set Path=2. 
; NOTE: This User Files Folder location is no longer recommended, and may cause problems on Vista.
; Path=2
;
; To set user files folder to <install folder>\UserFiles\, set Path=3. 
; NOTE: This User Files Folder location is no longer recommended, and may cause problems on Vista.
; Path=3
;
; You can set the user files folder to a specified path.  See example below. Do not put double quotes around the path.
; Path=C:\My Projects\Origin User Folder\
;
; You can set the user files folder to a specified path with %s. %s will be substituted with the logon user name. 
; See example below. Do NOT put double quotes around the path.
; Path=C:\Projects\%s\Origin User Folder\

[cdset]
1=System.Path.Ini$
2=System.Path.Program$+"Samples\LabTalk Script Examples"
3=System.Path.Program$
4=System.Path.Group$

[System Themes]
GraphNewGraph=Dark Colors & Light Grids
WksNewSheet=
WksNewTable=New Table
ReportTable=New Report


[WorkSheetAccelerators]
;XfnName[:nOffset][|nOption]|ShortCut
;Offset = 0,1,2 popup menu when choosing theme, or -1 if Open Dialog
;nOption = -1 if no Option Index menu

1 = FitNL|CTRL+Y
2=reimport|0|CTRL+4


[GraphAccelerators]
1 = FitNL|CTRL+Y
2 = expGraph|-1|CTRL+G
;Theme = 0 for Accelerator to apply <last used> theme


[LayoutAccelerators]

[MatrixAccelerators]
1=reimport|0|CTRL+4

[OTHER]

[WIZARDSCHEME]
;BKGROUNDCOLOR	= 16777215
;TEXTCOLOR		= 16711680
;LINECOLOR		= 16711680
;STARTCOLOR		= 65280
;FINISHCOLOR	= 255
;CUSTOMCOLOR	= 16776960
;VISITEDCOLOR	= 0
;SELECTEDCOLOR	= 255



[WksDefaultFont]
English=<auto>
German=<auto>
Japanese=ＭＳ Ｐゴシック
[Registration]
ProgramFolder=C:\ProgramData\Microsoft\Windows\Start Menu\Programs\OriginLab\Origin 2015
UserType=PR
ProgramFolderOriginPart=OriginLab\Origin 2015

[OutputLongName]
; %A = Analysis Name, FitNL, FitLR etc or for XF, =XF name, or each analysis will decide
; %W = input sheet name
; %N = input column Long name, but Short name if no Long name
; %B = input book's long name
; %S = input book's short name

DataAsInputDiffSheet = %A of %W %N
DataAsInputSameSheet = %A of %N
OutputAsInput = %A %N

[OutputLongNameG]
DataAsInputDiffSheet = %A of %W %N
DataAsInputSameSheet = %A of %N
OutputAsInput = %A %N

[OutputLongNameJ]
DataAsInputDiffSheet = %W・列%Nの%A
DataAsInputSameSheet = 列%Nの%A
OutputAsInput = %A %N


[Column Custom Format List]
CustomFmt0=yyyy'-'MM'-'dd HH':'mm':'ss
CustomFmt1=yyyy'-'MM'-'dd HH':'mm':'ss'.'###
CustomFmt2=yyyy'-'MM'-'dd hh':'mm':'ss tt
CustomFmt3=dd'/'MM'/'yyyy
CustomFmt4=dd'-'MM'-'yy
CustomFmt5=MM'/'dd'/'yyyy
CustomFmt6=MM'-'dd'-'yy
CustomFmt7=yy'/'MM'/'dd
CustomFmt8=yy'.'MM'.'dd
CustomFmt9=dd'.'MM'.'yy
CustomFmt10=yyyyMMdd
CustomFmt11=dd'-'MMM'-'yy

[HINST]
OK=100663296
VVAR=9.2000
LABUTIL=16777216
oc3dx9_64=591462400
OUIM9_64=706871296
OSTS9_64.DLL=701431808
OPACK9_64.DLL=685899776
ORESPR=699072512
OIMG9_64.DLL=632422400
[DBWINPOS]
Assgn0ID491=614 189 1151 832 1 0
Assgn0ID118=727 118 1322 978 1 0
Assgn0ID378=319 0 1497 710 1 0
Assgn0ID112=416 188 1982 1087 1 0
Assgn0ID209=318 246 1730 851 1 0
Assgn0ID163=407 587 1933 1023 1 0
Assgn0ID106=713 238 1335 858 1 0
Assgn0ID251=803 171 1687 1116 1 0
Assgn0ID234=674 298 1610 798 1 0
Assgn0ID431=321 147 1816 929 1 0
SCPLC=522 74 1527 1022 1 0
Assgn0ID246=476 291 1573 792 1 0
[ReminderMessages]
20046=1
20020=0 SwitchToReportSheet
[FileDialogView]
LastView=4
C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\=4
C:\Users\Julia\Documents\FP\F20\=4
E:\Rainer\FP\F44\=4
[FileExt]
Tracking=3
1_Name=Origin
1_DefPath=C:\Users\Julia\Documents\FP\F20\
1_OpenPathMode=1
1_SavePath=C:\Users\Julia\Documents\FP\F20\
1_SavePathMode=0
1_DefType=1
2_Name=Excel
2_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
2_OpenPathMode=1
2_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
2_SavePathMode=0
2_DefType=1
3_Name=Template
3_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
3_OpenPathMode=1
3_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
3_SavePathMode=0
3_DefType=1
4_NumTypes=3
4_TYPE1=[*.dat] *.dat
4_TYPE2=[Textdatei (*.txt)] *.txt
4_TYPE3=[Alle Dateien (*.*)] *.*
4_Name=ASCII
4_DefPath=C:\Program Files\OriginLab\Origin2015\Samples\
4_OpenPathMode=1
4_SavePath=C:\Program Files\OriginLab\Origin2015\Samples\
4_SavePathMode=0
4_DefType=1
5_Name=Lotus
5_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
5_OpenPathMode=1
5_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
5_SavePathMode=0
5_DefType=1
6_Name=ImportExcel
6_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
6_OpenPathMode=1
6_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
6_SavePathMode=0
6_DefType=1
7_Name=Dbase
7_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
7_OpenPathMode=1
7_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
7_SavePathMode=0
7_DefType=1
8_Name=DIF
8_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
8_OpenPathMode=1
8_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
8_SavePathMode=0
8_DefType=1
9_Name=Labtech
9_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
9_OpenPathMode=1
9_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
9_SavePathMode=0
9_DefType=1
10_Name=Sound
10_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
10_OpenPathMode=1
10_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
10_SavePathMode=0
10_DefType=1
11_Name=Mathematica
11_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
11_OpenPathMode=1
11_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
11_SavePathMode=0
11_DefType=1
12_Name=Kaleidagraph
12_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
12_OpenPathMode=1
12_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
12_SavePathMode=0
12_DefType=1
13_Name=Image
13_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
13_OpenPathMode=1
13_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
13_SavePathMode=0
13_DefType=5
14_Name=CSV
14_DefPath=C:\Program Files\OriginLab\Origin2015\Samples\Import and Export\
14_OpenPathMode=1
14_SavePath=C:\Program Files\OriginLab\Origin2015\Samples\Import and Export\
14_SavePathMode=0
14_DefType=1
15_Name=pClamp
15_DefPath=C:\Program Files\OriginLab\Origin2015\Samples\Import and Export\pCLAMP\
15_OpenPathMode=1
15_SavePath=C:\Program Files\OriginLab\Origin2015\Samples\Import and Export\pCLAMP\
15_SavePathMode=0
15_DefType=4
16_Name=Script
16_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
16_OpenPathMode=1
16_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
16_SavePathMode=0
16_DefType=1
17_Name=Notes
17_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
17_OpenPathMode=1
17_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
17_SavePathMode=0
17_DefType=1
18_Name=Editor
18_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
18_OpenPathMode=1
18_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
18_SavePathMode=0
18_DefType=1
19_Name=SigmaPlot
19_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
19_OpenPathMode=1
19_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
19_SavePathMode=0
19_DefType=1
20_Name=ODAQ
20_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
20_OpenPathMode=1
20_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
20_SavePathMode=0
20_DefType=1
21_Name=ThermoGalactic
21_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
21_OpenPathMode=1
21_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
21_SavePathMode=0
21_DefType=3
22_Name=MiniTab
22_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
22_OpenPathMode=1
22_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
22_SavePathMode=0
22_DefType=3
23_Name=OriginC
23_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
23_OpenPathMode=1
23_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
23_SavePathMode=0
23_DefType=1
24_Name=OriginCWorkspace
24_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
24_OpenPathMode=1
24_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
24_SavePathMode=0
24_DefType=1
25_Name=OPack
25_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
25_OpenPathMode=1
25_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
25_SavePathMode=0
25_DefType=1
26_Name=Samples
26_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
26_OpenPathMode=1
26_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
26_SavePathMode=0
26_DefType=1
27_Name=XFunction
27_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
27_OpenPathMode=1
27_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
27_SavePathMode=0
27_DefType=1
28_Name=EarthProbe
28_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
28_OpenPathMode=1
28_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
28_SavePathMode=0
28_DefType=1
29_Name=PrincetonInstruments
29_DefPath=C:\Program Files\OriginLab\Origin2015\Samples\Import and Export\Princeton Instruments SPE\
29_OpenPathMode=1
29_SavePath=C:\Program Files\OriginLab\Origin2015\Samples\Import and Export\Princeton Instruments SPE\
29_SavePathMode=0
29_DefType=1
30_Name=OriginFilterFiles
30_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
30_OpenPathMode=1
30_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
30_SavePathMode=0
30_DefType=1
31_Name=NetCDF
31_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
31_OpenPathMode=1
31_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
31_SavePathMode=0
31_DefType=1
32_Name=MDFFiles
32_DefPath=C:\Program Files\OriginLab\Origin2015\Samples\Import and Export\ETAS INCA MDF\
32_OpenPathMode=1
32_SavePath=C:\Program Files\OriginLab\Origin2015\Samples\Import and Export\ETAS INCA MDF\
32_SavePathMode=0
32_DefType=1
33_Name=Palette
33_DefPath=C:\Program Files\OriginLab\Origin2015\Palettes\
33_OpenPathMode=1
33_SavePath=C:\Program Files\OriginLab\Origin2015\Palettes\
33_SavePathMode=0
33_DefType=1
34_Name=DCFFiles
34_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
34_OpenPathMode=1
34_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
34_SavePathMode=0
34_DefType=3
35_Name=TDMFiles
35_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
35_OpenPathMode=1
35_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
35_SavePathMode=0
35_DefType=1
36_Name=JCAMP
36_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
36_OpenPathMode=1
36_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
36_SavePathMode=0
36_DefType=5
37_Name=DIADEMFiles
37_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
37_OpenPathMode=1
37_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
37_SavePathMode=0
37_DefType=1
38_Name=PPTFILEs
38_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
38_OpenPathMode=1
38_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
38_SavePathMode=0
38_DefType=1
39_Name=FAMOS
39_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
39_OpenPathMode=1
39_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
39_SavePathMode=0
39_DefType=1
40_Name=ImportFileTemplates
40_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
40_OpenPathMode=1
40_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
40_SavePathMode=0
40_DefType=5
41_Name=OriginPackage
41_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
41_OpenPathMode=1
41_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
41_SavePathMode=0
41_DefType=1
42_Name=MatlabFiles
42_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
42_OpenPathMode=1
42_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
42_SavePathMode=0
42_DefType=1
43_Name=OGSFiles
43_DefPath=C:\Program Files\OriginLab\Origin2015\Samples\LabTalk Script Examples\
43_OpenPathMode=1
43_SavePath=C:\Program Files\OriginLab\Origin2015\Samples\LabTalk Script Examples\
43_SavePathMode=0
43_DefType=1
44_Name=ASCIIEXP
44_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
44_OpenPathMode=1
44_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
44_SavePathMode=0
44_DefType=1
45_Name=PDF
45_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
45_OpenPathMode=1
45_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
45_SavePathMode=0
45_DefType=1
46_Name=ImageExp
46_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
46_OpenPathMode=1
46_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
46_SavePathMode=0
46_DefType=1
47_Name=CodeBuilder
47_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
47_OpenPathMode=1
47_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
47_SavePathMode=0
47_DefType=1
48_Name=Binary
48_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
48_OpenPathMode=1
48_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
48_SavePathMode=0
48_DefType=1
49_Name=UserDefined
49_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
49_OpenPathMode=1
49_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
49_SavePathMode=0
49_DefType=1
50_Name=SIE
50_DefPath=C:\Program Files\OriginLab\Origin2015\Samples\Import and Export\nCode Somat SIE
50_OpenPathMode=1
50_SavePath=C:\Program Files\OriginLab\Origin2015\Samples\Import and Export\nCode Somat SIE
50_SavePathMode=0
50_DefType=1
51_Name=IGOR
51_DefPath=C:\Program Files\OriginLab\Origin2015\Samples\Import and Export\Igor Pro
51_OpenPathMode=1
51_SavePath=C:\Program Files\OriginLab\Origin2015\Samples\Import and Export\Igor Pro
51_SavePathMode=0
51_DefType=1
52_Name=HEKA
52_DefPath=C:\Program Files\OriginLab\Origin2015\Samples\Import and Export\HEKA
52_OpenPathMode=1
52_SavePath=C:\Program Files\OriginLab\Origin2015\Samples\Import and Export\HEKA
52_SavePathMode=0
52_DefType=1
53_Name=Bin2D
53_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
53_OpenPathMode=1
53_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
53_SavePathMode=0
53_DefType=1
54_Name=CDF
54_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
54_OpenPathMode=1
54_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
54_SavePathMode=0
54_DefType=1
55_Name=HDF5
55_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
55_OpenPathMode=1
55_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
55_SavePathMode=0
55_DefType=1
56_Name=PowerPoint
56_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
56_OpenPathMode=1
56_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
56_SavePathMode=0
56_DefType=1
57_Name=PowerPointTemplate
57_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
57_OpenPathMode=1
57_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
57_SavePathMode=0
57_DefType=1
58_Name=BinF
58_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
58_OpenPathMode=1
58_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
58_SavePathMode=0
58_DefType=1
59_Name=EDF
59_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
59_OpenPathMode=1
59_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
59_SavePathMode=0
59_DefType=1
60_Name=ImageImp
60_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
60_OpenPathMode=1
60_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
60_SavePathMode=0
60_DefType=11
61_Name=mzXML
61_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
61_OpenPathMode=1
61_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
61_SavePathMode=0
61_DefType=1
62_Name=IAEASPE
62_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
62_OpenPathMode=1
62_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
62_SavePathMode=0
62_DefType=1
63_Name=PRISM
63_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
63_OpenPathMode=1
63_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
63_SavePathMode=0
63_DefType=1
64_Name=FCF
64_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
64_OpenPathMode=1
64_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
64_SavePathMode=0
64_DefType=1
65_Name=WorksheetWindow
65_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
65_OpenPathMode=1
65_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
65_SavePathMode=0
65_DefType=1
66_Name=MatrixWindow
66_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
66_OpenPathMode=1
66_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
66_SavePathMode=0
66_DefType=1
67_Name=GraphWindow
67_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
67_OpenPathMode=1
67_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
67_SavePathMode=0
67_DefType=1
68_Name=OriginImport
68_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
68_OpenPathMode=1
68_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
68_SavePathMode=0
68_DefType=1
69_Name=PowerPointWithTemplate
69_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
69_OpenPathMode=1
69_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
69_SavePathMode=0
69_DefType=1
70_Name=SAV
70_DefPath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
70_OpenPathMode=1
70_SavePath=C:\Users\Julia\Documents\OriginLab\2015\Anwenderdateien\
70_SavePathMode=0
70_DefType=1